CAD-CUT T-SHIRT VINYL
FASHIONFLEX - DIGICAT
(use on: Cotton, Poly/Cotton Blends and Poly/Acrylic)
- 20" Wide rolls
- FashionFlex is a WARM peel product
- Polyurethane, ready-to-cut material
- Thinner material makes it easy to weed, cut and heat apply *
- Available in Zebra Print
* All designs must be cut in reverse. Position heat transfer film on the garment and heat apply at 315ºF - 330ºF with firm pressure for 17-20 seconds. The polyester liner should be removed warm. Afterwards we recommend pressing the material for another 2 second with the same parameters. Release paper or Teflon sheet should always be placed between the heat platen and the plastic carrier sheet to prevent sticking and edge damage to the transferred design.
NOTE: If we are out of stock in the size you need, but we have a larger size available, please call and we will cut it down for you.